How to install CNC Flat Bed Lathe

CNC Flat Bed Lathe is currently one of the more widely used CNC Bed Lathe, which is mainly used for food processing. Let's introduce the installation method of the CNC Flat Bed Lathe. Here are some answers.

Here is the content list:

• Lifting and transportation of CNC Flat Bed Lathe.

• The basis and location of CNC Flat Bed Lathe.

• Installation of CNC Flat Bed Lathe.

• Preparation before commissioning.

Lifting and transportation of CNC Flat Bed Lathe

The lifting and positioning of CNC Flat Bed Lathe should use the lifting tools provided by the manufacturer, and other methods are not allowed. No lifting tools are needed, and steel wire ropes should be used to lift and place them in place according to the instructions.

The basis and location of CNC Flat Bed Lathe

The CNC Flat Bed Lathe should be installed on a firm foundation, and the location should be far away from the source of vibration; avoid sunlight and heat radiation, and place it in a dry place to avoid the influence of humidity and airflow. If there is a vibration source near the CNC Flat Bed Lathe, an anti-vibration trench must be set around the foundation.

Installation of CNC Flat Bed Lathe

CNC Flat Bed Lathe is placed on the foundation, it should be leveled in a free state, and then the anchor bolts are evenly locked. For standard machine tools, the amount mustn't exceed zero.04/1000mm, and for high-precision machine tools, the amount mustn't exceed zero.02/1000mm. Once mensuration the installation accuracy, it ought to be applied at a continuing temperature, and also the mensuration tool ought to be used once a hard and fast temperature amount. Once putting in the CNC Flat Bed shaper, each effort ought to be created to avoid forced deformation of the machine. Bound elements of the machine mustn't be disassembled nonchalantly once the machine is put in. The dismantlement of the elements could cause the distribution of the inner stress of the machine, thereby poignant the accuracy of the machine.

Preparation before commissioning

After the CNC Flat Bed Lathe has passed the geometric accuracy inspection, the whole machine needs to be cleaned. Use cotton or silk cloth soaked with the cleaning agent, not cotton yarn or gauze. Clean the anti-rust oil or anti-rust paint applied to safeguard the guide rail surface and also the machined surface once the machine leaves the mill. Clean the mud on the outer surface of the machine. Coat every slippy surface and dealing surface with grease specified by the machine. Check carefully whether all parts of the CNC Flat Bed Lathe are filled with oil as required, and whether enough coolant is added to the cooling box. Whether the oil of the hydraulic station of the machine tool and the lubrication device of the automatic room reaches the position specified by the oil level indicator. Check whether the switches and components in the electrical control box are normal and whether the integrated circuit boards are in place. The centralized lubrication system is started by electrifying so that the lubricating parts and the lubricating oil circuit are filled with lubricating oil. Make all the preparations before each part of the machine tool moves.

The above is the introduction about the installation method of the CNC Flat Bed Lathe, I hope it will be helpful to everyone. For more CNC Flat Bed Lathe related questions, please consult us. Years of accumulated R&D and production expertise can offer you additional product services and technical support! Our official website is https://www.saintymachine.com/.